* Shaft drive 3-differential full-time 4WD chassis.
* Chassis partially assembled by expert staff and checked individually by Yuichi Kanai.
* Race settings can be fine tuned with adjustments to wheelbase, tread, roll center, caster angle, toe angle and camber.
* Features 7075S-grade hard main chassis and hardened shock stays.
* Features high heat dissipation brake disk and center diff case with increased capacity.
* Mudguards on the rear suspension arms prevent dirt entering the drive shafts and wheels.
* Resin front/rear toque rods provide flexible running performance.
* Roll center can be adjusted with spacers on lower rear suspension arm.
* Maintenance-friendly design.
* Smaller front/rear diff unit, thinner cup joints and resin parts realize a lighter weight.
* Fuel tank with finger-hook cap delivers stable fuel supply.
* Stylish hex bolts hold firm throughout the chassis.
* Includes 3 servo horn types for various R/C systems (for SANWA / KO / JR / FUTABA / HiTEC)
* New low-height body design generates effective down force and realizes stable posture through the air as well as increasing maximum speed. Newly introduced oval-shaped air cleaner matches body design.
Chassis Technical Data
Length 490mm
Width 307mm
Height 180mm
Ground Clearance 28mm
Wheelbase 325mm (4 settings with rear hub collar position changes)
Tread (F/R) 254mm (2 front settings, 3 rear settings with bush changes)
Tire(F/R) sold separately
Gear Ratio 11.7：1
Weight 3,300g (approx.)
Engine 21-class engine (sold separately)
Δεν υπάρχουν σχόλια:
Δημοσίευση σχολίου